ASTM A240 ステンレス鋼板/シート (304/310S/309S/316L/317L/321/347H/2205/2507/904L/254smo/253mA)
製品説明 1. ASTM A240 S30408 304 ステンレス鋼プレート、良い価格 (304/310S/309S/316L/317L/321/347H/2205/2507/904L/254smo/253mA 2. 厚さ:
お問い合わせを送信してください説明
基本情報
モデル番号。 | 304 |
表面処理 | カラフル |
プロセス | 熱間圧延;冷間圧延 |
表面 | ミル表面;2b;Ba;Hl;No.1;No.4;カラーミラー |
長さ | 2000/2438/3000/6000mm |
幅 | 1000/1219/1500/1800/2000mm |
輸送パッケージ | エクスポートパッケージ |
仕様 | 0.4~3mm |
商標 | ZYTC |
起源 | 中国 |
HSコード | 7219131900 |
生産能力 | 1000000000トン/年 |
製品説明
商品名 | ASTM A240 S30408 304 ステンレス鋼プレートをお手頃価格で | |||
厚さ | 0.3mm~200mm | |||
幅 | 1000mm~2800mm | |||
長さ | 2000 mm、2438 mm、3000 mm、6000 mm または要件として | |||
仕上げる | No.1、2B、HL、NO.4、BA、SB、1D、2D、2C、2E、NO.5、NO.9 | |||
テクニカル | 熱間圧延、冷間圧延 | |||
標準 | ASTM 240、A480、JIS G 4304、EN 10088-2 | |||
MOQ | 5トン | |||
認証 | MTC タイプ 3.1、PMI、CO | |||
納期 | 在庫がある場合は7日 |
1. ASTM A240 S30408 304 ステンレス鋼板良い価格 (304/310S/309S/316L/317L/321/347H/2205/2507/904L/254smo/253mA)
2.厚さ:0.4〜200mm3.幅:1000/1219/1500/1800/2000/2500mm4.長さ:2000/2438/3000/6000mm、または要件に応じて他の長さ。5.表面:酸洗い。 ミル表面。 2B; HL; No.4; 8K; ミラーはカラフルです。 HL カラフル; エッチング表面など6.プロセス: 熱間圧延、冷間圧延、7。 弊社の材質グレードは201,202,1.4371,1.4373,SUS201,SUS202,301,303,304,304L,304LN,304N,309,309S,310,310S,316L,316Ti,317L,321,321H,347H,1.4319,1です。 4305、1.4301、1.4306、1.4833、1.4845 、1.4404、1.4571、1.4438、1.4541、SUS304、SUS304L、SUS309S、SUS310S、SUS316、SUS316Ti、SUS316L、409、409L、410S、420、430、440C、444、1.4016、1.4006、1.4002、 1.4125、1.4501、1.4362、1.4460、1.4521、1.4545 、1.4542、1.4568、1.4547、F51、F52、F53、F55、F60、630、631、17-4PH、15-5PH、S31254、S31803、S32900、S32205、S32750、S32550、S32760、S32304、S31 200、S17400、S17700、904L 、254SMo、1.4462、1.4410、1.4501、1.4362、1.4460、1.4545、1.4542、1.4568、1.4547、1.4529、1.4539など。
First of all from the reasons for rusty stainless steel. When the stainless steel surface of the passive film corrosion resistance in the weak part of the formation of pitting due to self-induced reaction, and then the formation of small holes, slowly with chloride ions close to the final formation of a highly corrosive liquid, More speed up the corrosion rate of stainless steel. There is also a reason for the corrosion of cracks between the crystal within the stainless steel, which destroyed the stainless steel surface of the passivation film. Therefore, the surface of stainless steel must always be cleaned and maintained, so as to extend its service life. However, when cleaning the surface of stainless steel should pay attention to: stainless steel surface can not scratch the phenomenon; can not use with bleach ingredients and abrasive cleaning solution, if the use of washing liquid, must be used after the end of clean water rinse.1.When the stainless steel surface is grease, oil pollution, you can use a soft cloth to wipe clean, and then use a neutral detergent or ammonia solution cleaning.2.When the stainless steel surface appears rainbow pattern, because too much use of detergent or oil caused by washing with warm water neutral detergent can be cleaned.3.When the stainless steel surface is dusty or easy to go out of the dirt, you can use soap, weak detergent or ask to rinse. Trademarks on the surface of stainless steel, when washed with warm water or weak detergents, the adhesive ingredients should be rinsed with alcohol or organic solvents.